HS869 PAN fiber braided packing

PAN fiber packing high strength polyacrylonitrile composite fiber woven, and then impregnated with PTFE emulsion and high temperature lubricant, has good lubricity and flexibility, in low temperature, low pressure conditions, is a kind of high quality and cheap sealing packing, such as adding a large number of fine graphite particles, especially suitable for all kinds of mixing machinery in the seal.

HS8513 PTFE wound gasket

HS8513 PTFE metal wound gasket is made of thin steel strip and PTFE strip alternately wound, and its structural density can be based on different locking forces. Requirements to produce, and the use of inner and outer steel rings to control its maximum compression, with good resilience, corrosion resistance, low leakage rate and other advantages, in the gasket In the category, it is most suitable for corrosion resistance and sealing of vacuum parts. It is the flange connection of valves, pumps, heat exchangers, towers, manholes, hand holes, etc. static sealing element. Widely used in petrochemical, machinery, electric power, metallurgy, shipbuilding, medicine, atomic energy and aerospace and other fields.

HS853-3 modified PTFE gasket RPTFE

HS853-3 filling modified PTFE gasket is to use PTFE resin to add a certain amount of filler, such as glass fiber, bronze powder, molybdenum disulfide, graphite, carbon fiber, etc., after high-speed mixing and uniform molding with a mold, and then made by high-temperature sintering. Filled PTFE gasket due to the addition of a certain amount of filler in PTFE products, thus greatly improving some of the characteristics of PTFE, especially wear resistance, thermal conductivity, resistance to waxy change, self-lubrication and other aspects than pure PTFE products have significantly improved.

HS8514 Non-asbestos Metal Wound Gasket

Product Introduction HS8514 non-asbestos metal winding pad is made of thin steel belt and non-asbestos belt alternately wound, its structural density can be made according to different locking force requirements, and the use of inner and outer steel rings to control its maximum compression, with temperature resistance, pressure resistance, oil resistance, excellent air tightness, good resilience and low leakage rate. Especially suitable for uneven load, easy relaxation of joint force, temperature and pressure changes periodically, impact or vibration occasions. Valves, pumps, heat exchangers, towers, manholes, hand holes and other flange joint static sealing components. Widely used in petrochemical, machinery, electric power, metallurgy, shipbuilding, medicine, atomic energy and aerospace and other fields.