HS869 PAN fiber braided packing

PAN fiber packing high strength polyacrylonitrile composite fiber woven, and then impregnated with PTFE emulsion and high temperature lubricant, has good lubricity and flexibility, in low temperature, low pressure conditions, is a kind of high quality and cheap sealing packing, such as adding a large number of fine graphite particles, especially suitable for all kinds of mixing machinery in the seal.

HS868 ramie fiber braided packing

Ramie fiber braided packing is a packing made of ramie fiber braided by special process and high temperature lubricant, which will not pollute the product. Less maintenance, easy to install, the pump shaft or valve stem will not cause wear. Especially suitable for thermal power plant ash pump, slurry pump, pre pump and feed pump seal and oil field high pressure mud pump, mine emulsion pump seal.

HS8633 oil-containing PTFE fiber braided packing

HS8633 oil-containing PTFE fiber packing is made of PTFE wire repeatedly impregnated with silicone oil and other lubricants treatment, low friction coefficient, suitable for dynamic seal pump seal. Oily PTFE packing has excellent corrosion resistance, good self-lubrication and thermal conductivity, excellent chemical resistance and high tensile strength. Can be used at high speed for a long time without wear on the pump and shaft. According to customer requirements, it can be molded into an oily PTFE fiber packing ring. Performance Parameters Performance Technical Parameters Use Pressure 2.5Mpa (Rotary Pump) 10Mpa (Reciprocating Pump) 20Mpa (Valve) Applicable Temperature -180 ℃ ~ 260 ℃ pH 2-12 Linear Speed 10 M/S (Rotary Pump) 2 M/S (Reciprocating Pump) 2 M/S (Valve) Available Section Size ≥ 1/8 "~ ≤ 3" (3*3~75*75mm) Density 1.70-1.80 g/cm Note: according to the need to add iron red silicone rubber strip elastomer in the core part of the packing.